HP1106K is manufactured using Spheripol® technology. This medium-flow homopolymer polypropylene grade is recommended for producing films that can be converted into stretched tapes, making it well-suited for weaving applications.
Polypropylene is manufactured using the Novolen® vertical stirred gas-phase polymerization process. HP1102K is a homopolymer polypropylene grade characterized by low water carry-over. It is specifically designed for producing films that can be converted into stretched tapes, ideal for weaving applications.
PP H1045 is a polypropylene homopolymer with a melt flow rate (MFR) of 4.5 g/10 min, specially designed for high extrusion speed lines producing stretch tapes. It offers low water carry-over and low shrinkage, along with a well-balanced combination of strength, shrinkage control, and reduced splitting tendency. This grade is compliant with food contact regulations, making it suitable for various applications.
PP H1030 is a polypropylene homopolymer with a melt flow rate (MFR) of 3 g/10 min, specially designed for stretch tape production using water bath and chill roll processes. It offers low water carry-over and low shrinkage, combined with good mechanical properties. Additionally, TASNEE® PP H1030 complies with food contact regulations, making it suitable for a variety of applications.
This grade is also used in general-purpose extrusion and injection molding for technical items
PP 5001P is a polypropylene homopolymer resin specifically designed for yarn extrusion. Yarns produced from this resin demonstrate excellent mechanical properties along with low water carryover, ensuring high-quality performance in textile applications.
Note: This product is not intended for use in medical and pharmaceutical applications.
PP 500P is a medium-flow, multipurpose polypropylene grade designed for both extrusion and injection molding applications. It offers balanced processing characteristics suitable for a wide range of general-purpose manufacturing needs.
If applied for extrusion, this grade shows excellent stretchability and is therefore suitable for:
For thermoforming, it shows a unique balance between transparency, impact resistance and thickness uniformity. SABIC PP 500P is suitable for the production of injection-moulded articles, e.g., caps and closures and household products, where this grade shows a high stiffness, combined with a fair impact resistance and very good surface hardness.
PP 511A is a polypropylene homopolymer resin specifically developed for extrusion applications such as spunbond and continuous filament spinning, delivering excellent tensile properties for nonwoven fabrics. Its narrow molecular weight distribution is achieved through balanced controlled rheology, ensuring consistent performance. PP 511A is compatible with all existing spunbond and continuous filament machinery used to produce various nonwoven compositions from narrow molecular weight polypropylene resins. The grade also features a specially developed anti-gas fading formulation to minimize fiber discoloration, maintaining high-quality appearance.
PP 511A is typically used for the production of non-wovens and fibres used in:
PP 519A is a polypropylene homopolymer resin specifically engineered to optimize the production speed of very fine filament titers, delivering an excellent balance of mechanical properties and softness. Its rheological performance enables enhanced production efficiency, especially for fiber manufacturing characterized by consistent high-speed operation and low nonwoven weights at reduced temperatures.
Featuring a very narrow molecular weight distribution, SABIC® PP 519A is compatible with all existing spunbond machine technologies used for producing diverse nonwoven compositions. Additionally, it incorporates a specially developed anti-gas fading formulation to minimize fiber discoloration, ensuring superior product quality.
PP H2350 is a polypropylene homopolymer with a melt flow rate (MFR) of 35.0 g/10 min and a very narrow molecular weight distribution. It is specially designed for the extrusion of fine fibers using spunbond technology in non-woven applications. Additionally, it is suitable for continuous filament (CF) yarn production, delivering excellent performance and consistency.
PP H2350 is intended for the extrusion of (HTY) and spunbond nonwoven. It is also utilized for coating applications as well as general-purpose injection molding grade for thin-wall applications.
PP H2250 is a polypropylene homopolymer with a melt flow rate (MFR) of 25 g/10 min and a medium-narrow molecular weight distribution. Featuring an anti-gas fading stabilization system, it is specifically designed for extruding fine fibers using spunbond technology for non-woven applications. Additionally, it is well suited for the extrusion of bulk continuous filament (BCF) for carpet pile and continuous filament (CF) yarn production.
PP H2250 is used for Spunbond non-woven applications and is also suitable for BCF/CF yarns. It is also utilized for coating applications and as a general-purpose injection molding grade for thin-wall applications.
