8 cSt is a high-performance Group III base oil known for its excellent oxidation stability, low sulfur content, high viscosity index, and superior low-temperature fluidity. This base oil is often used as a blending component in various industrial and automotive lubricants and functional fluids. Additionally, it serves as an effective viscosity index improver for lower viscosity base oils. Its enhanced thermal and oxidation stability provides increased engine protection and helps increase lubricant life. It has a viscosity of approximately 7.6-8.2 cSt at 100°C.

Advantages:

• Low Pour Point: Ensures excellent pumpability and quick starts in freezing temperatures, suitable for diverse climates.
• Thermal Oxidation Stability: Reduces oil oxidation and prevents scale buildup at high engine temperatures.
• Low Volatility: Decreases oil consumption, reducing the need for frequent refills.
• Enhanced Durability: Achieves 1.5 to 2 times the lifespan of conventional mineral oils, suitable for demanding applications.
• Compatibility: Compatible with both mineral oils and synthetic ethers, offering formulation flexibility.

Applications:

Textile and cutting oils, lubricant formulations for turbines, engine oils, heat pumps, heat exchangers, and hydraulic fluids. Blending component to enhance the viscosity index of other base oils. Additive in various industrial and automotive lubricants

Health & Safety Information:

This lubricant is formulated with highly refined mineral oils and performance additives. Under normal usage conditions, it poses no significant toxic hazard. However, all lubricants must be handled with care to ensure user safety and environmental protection.

• Continuous skin contact can result in irritation—clean the area well after exposure.
• In the event of skin contact, cleanse the area immediately using soap and water.
• Do not dispose of used oil into drains, watercourses, or the environment.
• Dispose of the used oil at an authorized collection or recycling facility.

Virgin Base Oil 6 cSt is a high-performance Group III hydrocracked base oil distinguished by its outstanding oxidation stability, low sulfur content, high viscosity index (above 120), and superior low-temperature fluidity. The “6 cSt” refers to the oil’s kinematic viscosity measured in centistokes (cSt) at elevated temperatures, indicating how easily the oil flows—the higher the cSt, the thicker the oil.

This base oil is produced using an advanced Iso-dewaxing process, which significantly reduces sulfur and aromatic compounds. Although often marketed as partly synthetic or synthetic lubricants in some regions, these oils contain no chemically synthesized components and have over 90% saturates. It has a viscosity of approximately 5.8-6.2 cSt at 100°C.

Because of their low aromatic content, Group III base oils have limited additive solubility but offer superior molecular uniformity, stability, and very low electrical conductivity (under 10 pS/m), reflecting their near non-polar nature. These attributes make them well-suited as base stocks for engine oils and advanced industrial lubricants. They are commonly blended with additives and sold as synthetic or semi-synthetic products.

Applications:

• Utilized in premium engine oils, transmission fluids, and select industrial oils requiring superior stability, low viscosity, and minimal volatility.
• Commonly employed as a trimming base oil to help finished lubricants achieve targeted low viscosity and volatility specifications.

Health & Safety Information:

This lubricant is formulated with highly refined mineral oils and performance additives. Under normal usage conditions, it poses no significant toxic hazard. However, all lubricants must be handled with care to ensure user safety and environmental protection.

• Continuous skin contact can result in irritation—clean the area well after exposure.
• In the event of skin contact, cleanse the area immediately using soap and water.
• Do not dispose of used oil into drains, watercourses, or the environment.
• Dispose of the used oil at an authorized collection or recycling facility.

Group III 4 cSt base oil is widely used in the formulation of high-quality engine oils. It is produced through hydro-skimming of unconverted oil under high pressure, resulting in a product with a high viscosity index, excellent low-temperature flow properties, ultra-low sulfur content, minimal aromatic hydrocarbons, and low volatility.

These base oils undergo the most advanced mineral oil refining processes among all base oil groups. While not chemically synthesized, they exhibit exceptional molecular uniformity, stability, and performance. These attributes lead to Group III 4 cSt base oils being widely used as a base for synthetic or semi-synthetic lubricants, with a viscosity of approximately 3.9-4.5 cSt at 100°C.

Advantages:

• Low Pour Point: Ensures excellent pumpability and quick engine starts even in freezing temperatures, making it suitable for diverse climates.
• Thermal Oxidation Stability: Minimizes oil oxidation and scale deposits during high-temperature engine operation.
• Low Volatility: Reduces oil consumption, decreasing the need for frequent top-ups.
• Extended Oil Life: Offers service life 1.5 to 2 times longer than conventional mineral oils under harsh conditions.
• Compatibility: Easily blends with mineral oils and synthetic ethers, facilitating versatile lubricant formulations.

Applications:

• Industrial, hydraulic, and engine oils
• Drill fluids and related agents
• Automotive lubricants
• Functional fluids
• Transformer oils
• Automatic transmission fluids (ATF)

Health & Safety Information:

This lubricant is formulated with highly refined mineral oils and performance additives. Under normal usage conditions, it poses no significant toxic hazard. However, all lubricants must be handled with care to ensure user safety and environmental protection.

• Continuous skin contact can result in irritation—clean the area well after exposure.
• In the event of skin contact, cleanse the area immediately using soap and water.
• Do not dispose of used oil into drains, watercourses, or the environment.
• Dispose of the used oil at an authorized collection or recycling facility.

3 cSt base oil is a premium Group III base oil, celebrated for its superior performance characteristics. Its excellent oxidation stability, low sulfur content, high viscosity index, and outstanding low-temperature fluidity make it a vital component in a broad range of industrial and automotive lubricants. It has a vicosity of approximately 3-3.5 cSt at 100°C.

Key Features:

• Oxidation Stability: Prolongs lubricant life and minimizes harmful deposits.
• Low Sulfur Content: Reduces environmental impact and complies with strict regulations.
• High Viscosity Index: Delivers consistent performance across extreme temperatures.
• Excellent Low-Temperature Fluidity: Ensures reliable pumpability and quick starts even in freezing conditions.

Enhanced Engine Protection and Longevity:

With improved thermal and oxidative stability, 3 cSt base oil helps protect engines better, extends lubricant service intervals, and lowers maintenance costs.

Applications:

3 cSt base oil serves as a versatile blending component across multiple industries, including:

• Textile and Cutting Oils: Enhances efficiency and extends the service life of textile machinery and cutting tools.
• Turbine Lubricants: Provides reliable protection and optimal performance in turbine systems.
• Engines, Heat Pumps, Heat Exchangers, and Hydraulic Fluids: Delivers superior lubrication and safeguards critical components.
• Viscosity Index Improver: Improves the viscosity index of other base oils, boosting overall lubricant performance.
• Additive for Industrial and Automotive Lubricants: Enhances the quality and effectiveness of lubricants used in diverse applications.

Health & Safety Information:

This lubricant is formulated with highly refined mineral oils and performance additives. Under normal usage conditions, it poses no significant toxic hazard. However, all lubricants must be handled with care to ensure user safety and environmental protection.

• Continuous skin contact can result in irritation—clean the area well after exposure.
• In the event of skin contact, cleanse the area immediately using soap and water.
• Do not dispose of used oil into drains, watercourses, or the environment.
• Dispose of the used oil at an authorized collection or recycling facility.

Virgin Base Oil 2 cSt, a Group III base oil, is derived through advanced hydrocracking and Iso-dewaxing processes for exceptional purity and performance. This method yields a product with extremely low levels of sulfur and aromatic compounds, resulting in a clean, highly saturated oil with superior performance characteristics.

With a viscosity of approximately 1.9-2.3 cSt at 100°C, Group III base oils are often labeled as partly synthetic or even synthetic in some regions, despite being derived purely from refined mineral sources. They do not contain chemically synthesized components, but their performance rivals that of full synthetics.

Due to their low aromatic content, these oils exhibit limited additive solubility but offer excellent molecular uniformity, high thermal and oxidative stability, and very low electrical conductivity (typically under 10 pS/m), indicating a non-polar character.

Key Features:

• Produced through Iso-dewaxing and hydrocracking for high purity
• Very low sulfur and aromatic levels
• Highly saturated (>90%) for improved stability
• Viscosity Index >120, ideal for wide temperature ranges
• Low polarity and excellent oxidation resistance
• Considered semi-synthetic or synthetic in various markets
• Consistent molecular structure for reliable formulation

Applications:

• Textile oils and cutting fluids
• Lubricant formulations for turbines
• Engine oils and hydraulic fluids
• Heat pumps and heat exchangers
• Blending component to enhance the viscosity index of other base oils
• Additive in various industrial and automotive lubricants
• Base stock for motor oils
• Modern industrial lubricants

Health & Safety Information:

This lubricant is formulated with highly refined mineral oils and performance additives. Under normal usage conditions, it poses no significant toxic hazard. However, all lubricants must be handled with care to ensure user safety and environmental protection.

• Continuous skin contact can result in irritation—clean the area well after exposure.
• In the event of skin contact, cleanse the area immediately using soap and water.
• Do not dispose of used oil into drains, watercourses, or the environment.
• Dispose of the used oil at an authorized collection or recycling facility.

N600 is a high-viscosity Group II base oil produced through hydrocracking and hydroprocessing, which significantly increases saturation levels and eliminates impurities such as sulfur, nitrogen, and aromatics. These advanced refining techniques result in a cleaner, more stable oil with enhanced thermal and oxidative performance.

This base oil performs well in areas such as volatility control, oxidation stability, and flash/fire points. However, it offers only moderate performance in low-temperature behavior, including pour point, cold crank viscosity, and extreme pressure wear resistance. With a viscosity of approximately 11.5-12.8 cSt at 100°C, N600 is a reliable choice for applications requiring high-temperature stability and cleanliness.

Advantages:

• Improved Oxidation Stability — prolongs lubricant life and prevents sludge buildup
• Lower NOACK Volatility — minimizes evaporation and oil consumption
• Stable Viscosity — ensures consistent lubrication over a wide temperature range
• Superior Base Number Retention — enhances detergent performance for longer protection
• Cost Efficiency — offers Group II benefits at a price close to Group I
• Reduced Component Wear — protects engine and machinery parts from frictional damage
• Extended Drain Intervals — supports longer lubricant service life

Standout Features:

• Excellent high-temperature resistance
• Strong antioxidant performance
• Low sulfur content – safer for operators and environmentally friendly
• Colorless, odorless, and highly refined transparent oil

Applications:

• Transformer oils
• Ink oils
• Marine oils
• Industrial gear oils
• Automotive transmission fluids
• White oils
• Process oils
• Gear and axle oils
• Multi-purpose lubricants
• Mold release oils
• Hydraulic oils
• Motion control oils

Health & Safety Information:

This lubricant is formulated with highly refined mineral oils and performance additives. Under normal usage conditions, it poses no significant toxic hazard. However, handle all lubricants with care to ensure user safety and environmental protection.

• Prolonged skin contact can irritate—clean the area thoroughly after exposure.
• In the event of skin contact, cleanse the area immediately using soap and water.
• Do not dispose of used oil into drains, watercourses, or the environment.
• Dispose of the used oil at an authorized collection or recycling facility.

N500 Base Oil is a Group II hydrocracked base oil produced through advanced hydroprocessing, which increases the saturated content while effectively removing impurities such as sulfur, nitrogen, and metals. This method produces a cleaner, more stable oil with enhanced performance properties compared to traditional Group I base oils.

N500 offers moderate to strong performance in key lubricating properties such as oxidative stability, volatility, and flash/fire points, making it suitable for a wide range of lubricant formulations. However, its performance is more limited in areas like low-temperature properties, cold crank viscosity, and extreme pressure wear protection.

With a viscosity of approximately 9.8-12.3 cSt at 100°C, N500 is considered less polar, making it ideal for applications requiring high thermal and oxidative stability.

Advantages:

• Excellent Oxidation Control: Enhances oil life and engine cleanliness
• Lower NOACK Volatility: Reduces oil evaporation and consumption
• Stable Viscosity: Maintains optimal viscosity across varying operating conditions
• Superior Base Number Retention: Prolongs detergent effectiveness and oil service life
• Cost-Effective: Offers improved performance while remaining price-competitive with Group I oils
• Wear Protection: Helps minimize engine wear and extend component life
• Longer Drain Intervals: Supports extended oil change intervals, reducing maintenance frequency

Applications:

• Transformer oils
• Ink oils
• Marine oils
• Industrial gear oils
• Automotive transmission fluids
• White oils
• Process oils
• Gear oils
• Axle oils

Health & Safety Information:

This lubricant is formulated with highly refined mineral oils and performance additives. Under normal usage conditions, it poses no significant toxic hazard. However, handle all lubricants with care to ensure user safety and environmental protection.

• Prolonged skin contact can irritate—clean the area thoroughly after exposure.
• In the event of skin contact, cleanse the area immediately using soap and water.
• Do not dispose of used oil into drains, watercourses, or the environment.
• Dispose of the used oil at an authorized collection or recycling facility.

N–220 Base Oil is a Group II virgin base oil produced through advanced hydrocracking and hydro processing techniques. These methods significantly increase the saturated content while effectively removing sulfur, nitrogen, and other impurities, resulting in a cleaner and more stable lubricant base.

With a viscosity of approximately 5.8-6.8 cSt at 100°C and 40-46 cSt at 40°C, 220N offers moderate to good lubricating performance, making it suitable for use in a variety of automotive and industrial lubricant formulations.

Advantages:

• Superior Oxidation Resistance: Provides better protection against thermal breakdown and sludge formation.
• Improved NOACK Volatility Performance: Reduces oil consumption and evaporative loss under high temperatures.
• Enhanced Viscosity Stability: Maintains optimal viscosity over time, ensuring consistent lubrication.
• Better Base Number Retention: Helps preserve detergent properties, extending oil life and engine cleanliness.
• Cost-Effective: Competitively priced, offering a performance upgrade over Group I oils at a marginal cost difference.
• Extended Drain Intervals: Reduces the frequency of oil changes, minimizing maintenance downtime.
• Reduced Wear: Offers superior film strength, minimizing wear on critical engine components.

Applications:

• Transformer oils
• Marine and industrial gear oils
• Automatic transmission fluids (ATF)
• White oils
• Gear and axle oils
• Anti-adhesive formulations
• Anti-caking agents and solutions

Health & Safety Information:

This lubricant is formulated with highly refined mineral oils and performance additives. Under normal usage conditions, it poses no significant toxic hazard. However, handle all lubricants with care to ensure user safety and environmental protection.

• Prolonged skin contact can irritate—clean the area thoroughly after exposure.
• In the event of skin contact, cleanse the area immediately using soap and water.
• Do not dispose of used oil into drains, watercourses, or the environment.
• Dispose of the used oil at an authorized collection or recycling facility.

N150 Base Oil is a popular Group II base oil commonly used in manufacturing premium lubricants. It is manufactured through an advanced hydrocracking refining process that enhances its chemical structure, resulting in improved stability and performance compared to lower-grade oils. It has a viscosity of 5-5.5 cSt at 100°C. As a light refined base oil, N150 ranks close to the lower threshold within Grade II light base oil standards. The production involves solvent refining and dewaxing steps, followed by hydrotreatment to remove impurities and optimize product purity.

Primarily, N150 serves as a reliable base stock for lubricant and lubricant additive formulations across various industrial and automotive applications.

Applications:

N 150 serves as a base stock for several industrial lubricants

• General purpose oils
• Mould oil
• Transmission fluids
• Gear oils
• Metal working fluids
• Additives
• Hydraulic oils
• Machine oils
• Hydraulic oils
• Engine oil
• Transmission oils for automatic transmissions
• Technological oils
• Maintenance oils
• Protective oils
• Anti-adhesive oils
• Anticaking solutions

Safe Handling Guidelines:

These lubricants are formulated with highly refined mineral base oils and specific additives. Under normal use, they do not pose significant toxic hazards. However, all lubricants should be handled with care to ensure safety and environmental protection.

Precautions:

Avoid prolonged or repeated contact with skin. Prevent splashing and exposure to combustible materials. Always store in a covered area, away from sources of pollution. Dispose of used oil responsibly—never pour it into drains, watercourses, or onto the ground.

110N is a Group II paraffinic base oil characterized by low viscosity and high purity. It is produced through advanced hydrocracking and hydro-dewaxing, which effectively removes sulfur, nitrogen, metals, and other impurities. The result is a clean, highly saturated base oil with excellent thermal and oxidative stability. It has a viscosity of 3.8-4.4 cSt at 100°C and 21-25 cSt at 40°C. With lower NOACK volatility than many other Group II 4 cSt base oils, 110N is particularly well-suited for engine oil formulations and other high-performance lubricant applications requiring low evaporation and consistent viscosity.

Key Features:

• Water-clear and colorless
• Highly saturated for enhanced chemical stability
• Outstanding oxidation and thermal resistance
• Excellent demulsibility for efficient water separation
• Designed with low volatility to decrease oil evaporation and reduce emissions.
• Consistent molecular structure for formulation reliability
• Very low aromatic content and impurities.
• Consistent viscosity stability across diverse operating conditions.

Applications:

Automotive & Transportation — Lubricants & Functional Fluids

• Engine oils
• Automatic transmission fluids

Industrial Lubricants

• Hydraulic fluids
• Gear oils
• Compressor oils
• Metalworking fluids

Other Applications:

• Grease manufacturing
• Process oils

Safe Handling Guidelines:

These lubricants are formulated with highly refined mineral base oils and specific additives. Under normal use, they do not pose significant toxic hazards. However, all lubricants should be handled with care to ensure safety and environmental protection.

Precautions:

Avoid prolonged or repeated contact with skin. Prevent splashing and exposure to combustible materials. Always store in a covered area, away from sources of pollution. Dispose of used oil responsibly—never pour it into drains, watercourses, or onto the ground.